A 40 x 60 shower pan typically costs between $550 and $975 for the pan alone, with tile-ready models from Tile Redi and Transolid leading this size in 2026. Add another $350 to $600 for basic installation labor.
- 40 x 60 Shower Pan Price Ranges by Material
- Tile Redi vs. Transolid for a 40 x 60 Shower Pan
- Barrier Free and ADA Options in This Size
- Drain Placement: Center, Left, Right, or Linear
- Measuring Your Shower Footprint Before You Buy
- Installing a 40 x 60 Shower Pan: DIY or Call a Pro
- Common Mistakes With This Shower Pan Size
- Choosing the Right 40 x 60 Shower Pan
40 x 60 Shower Pan Price Ranges by Material
Pan material drives most of the price difference in this size. Basic acrylic and fiberglass alcove pans cost less, while tile-ready and solid surface pans cost more because of the pre-pitched design and built-in splash walls.
| Pan Type | Typical Price Range (Pan Only) | What Affects the Price |
|---|---|---|
| Acrylic or fiberglass alcove pan | $150 to $620 | Brand, thickness, threshold style |
| Tile-ready one-piece pan (Tile Redi) | $600 to $975 | Drain style, barrier free vs. curbed, current promotions |
| Solid surface pan (Transolid Trimslate) | $550 to $800 | Color, zero threshold vs. single threshold |
| Custom tile or mud-set pan | $900 to $3,500 | Tile choice, labor, size of the mud bed |
At the time of this research, Tile Redi’s 40 x 60 barrier free pan with a left drain and chrome grate listed around $822. The same brand’s linear trench drain version in this size ran closer to $973. Transolid’s 39.4 x 60 solid surface pan with a center drain priced between $599 and $797 depending on the color you pick.
Installing the pan adds cost on top of that. Basic installation usually takes about four hours and runs $350 to $570 in labor when the drain stays put. Full shower pan replacement, materials and labor combined, averages $900 to $2,300 for most homeowners, though moving the drain or adding custom tile pushes that higher.
:antCitation[]{citations=”b4046d78-3165-4216-bff6-3809edbd16d6,8cfa3ecb-2bb9-4603-84d4-8771024cd365″}
Current pricing reflects specific retailer listings, including promotional discounts that change often. Treat these numbers as a planning range, not a locked quote for your project.
Tile Redi vs. Transolid for a 40 x 60 Shower Pan
These two brands make up most of what you’ll actually find labeled as “40 x 60” or the close equivalent “39.4 x 60.” They solve different problems.
Tile Redi builds one-piece, pre-pitched pans in ABS plastic and PVC, ready to tile straight over the surface. You get a barrier free entrance with no curb, several drain positions, and a factory slope built in. That convenience shows up in the price, generally $600 to $975 in this size.
Transolid’s Trimslate pans use a solid surface material the brand calls Transtone, finished with a slip resistant slate texture. Several colors are available, including white, grey, black, and cameo. You can trim the base slightly to fit an odd rough opening, and it comes with a single threshold rather than a barrier free entrance in most listings. It’s usually $150 to $200 cheaper than the Tile Redi barrier free option.
If you want a curbless, roll-in shower, Tile Redi’s barrier free line is the more direct fit. If you’re keeping a standard threshold and want a finished, tileable surface without pouring mud, Transolid is the simpler buy.
Barrier Free and ADA Options in This Size
The 40 x 60 footprint shows up often in barrier free showers, and that’s not a coincidence. It’s large enough to meet common accessible shower guidelines while still fitting a standard bathroom footprint.
Tile Redi pre-pitches its pans at a quarter inch of slope per foot to meet plumbing code and channel water straight to the drain. That factory slope matters more in a barrier free design, since there’s no curb to hold water back if the pitch is off.
Tile Redi lists its 40 x 60 barrier free pans as ADA compliant, which makes this size a common pick for aging-in-place remodels, wheelchair access, or anyone who just wants a curbless walk-in shower. Local accessibility requirements can still vary, so if this is a code-driven remodel, confirm the specifics with your local building department, also called the authority having jurisdiction, before you finalize the design.
Drain Placement: Center, Left, Right, or Linear
Drain position isn’t just a style choice. It has to match your existing plumbing rough-in unless you’re willing to pay a plumber to relocate the drain line.
- Center drain: The most common setup, and usually the easiest match for an existing shower footprint.
- Left or right drain: Useful when your existing plumbing sits off-center, or when the layout calls for it.
- Back or linear trench drain: A narrow, integrated trench drain along one edge, often paired with a brushed nickel or polished grate. It gives a cleaner look but usually costs more, closer to the $973 range for a 40 x 60 barrier free version.
Measure your current drain location before you order anything. Pans in this size aren’t cheap, and drain position isn’t something you can fix after installation without redoing the mortar bed.
Measuring Your Shower Footprint Before You Buy
Pull the tape measure before you shop, not after the pan shows up. Measure the rough opening at the floor, not the framed wall dimension, since tile and backer board eat into that space.
Check the actual product dimensions too. A pan labeled “40 x 60” from one brand and “39.4 x 60” from another aren’t identical, and that 0.6-inch gap matters when you’re fitting it against existing tile or framing. Note the drain center point, the subfloor height, and whether you’re keeping a curb or going barrier free, since a barrier free pan needs the subfloor recessed to match the pan’s front lip.
Installing a 40 x 60 Shower Pan: DIY or Call a Pro
A straightforward pan swap, same drain location, same curb style, is within reach for an experienced DIYer comfortable working with mortar and a level. You’re setting the pan in a bed of modified thin-set, checking it’s level in both directions, and sealing the drain connection before you tile.
Call a licensed plumber or contractor when any of these apply:
- You’re moving the drain location, which means cutting into the subfloor and altering the drain line.
- You’re converting a curbed shower to barrier free, which usually means recessing the subfloor.
- You find water damage, soft subfloor, or signs of an old leak once you pull up the existing pan.
- Your area requires a permit or inspection for plumbing changes, which a local building department can confirm.
Common Mistakes With This Shower Pan Size
The biggest mistake is buying based on the “40 x 60” label alone. Confirm the actual width and depth against your rough opening, since manufacturers round differently.
Second, check that the entire pan surface slopes toward the drain, not just the center section. Some budget pans leave flat, unsloped material near the edges, which traps standing water even when the installation itself is correct.
Third, don’t skip the subfloor prep for a barrier free pan. Setting a barrier free pan on a standard, unrecessed subfloor leaves the entrance too high to be truly curbless, and it can throw off the pan’s factory pitch.
Choosing the Right 40 x 60 Shower Pan
For most bathrooms, the decision comes down to threshold style and budget. A tile-ready 40 x 60 shower pan with a barrier free entrance costs more but gives you a curbless, low-maintenance walk-in shower. A solid surface pan with a standard threshold costs less and installs into a typical curbed shower opening without subfloor changes.
Match the drain position to your existing plumbing first. Confirm the exact rough opening second. After that, it’s mostly a question of finish and how much you want to spend on labor versus doing the pan install yourself.
What’s the actual size of a “40 x 60” shower pan?
It depends on the brand. Tile Redi lists true 40-inch by 60-inch dimensions, while Transolid’s comparable pan measures 39.4 inches by 60 inches. Always check the listed product dimensions against your rough opening before ordering.
Can I install a 40 x 60 shower pan myself?
Yes, if you’re keeping the same drain location and threshold style, and you’re comfortable working with mortar and a level. Moving the drain, converting to barrier free, or dealing with subfloor damage usually calls for a licensed pro.
What drain positions come in this size?
Center, left, and right drains are the most common. Some models, like Tile Redi’s Redi Trench line, offer a back-mounted linear trench drain instead of a round drain.
Do I need a permit to replace a shower pan?
It depends on your local rules and whether you’re changing the drain location. Permit and inspection requirements vary by city and county, so check with your local building department before you start.
Is a barrier free 40 x 60 pan worth the extra cost?
It’s worth it if accessibility, aging in place, or a curbless look matters for your household. If you just want a standard replacement pan, a single threshold model will save you money.
